Easy LPFM Radio Licensing
Get Adobe Flash player

NSC1
Stereo Generator

Picture

This is a high performance Stereo Generator built into a one- rack space unit. Its stereo separation performance is higher than 60 dB with S/N higher than 85 dB. A high sensitivity VU meter allows accurate measurement of audio input levels. The two balanced audio inputs (XLR Connectors) are filtered from RF interference. The very low distortion (typical 0.05 dB) makes this low cost generator comparable in performance to the more expensive digital equipment.

NSC1 Stereo Coder Specifications 

  • L & R Input connectors: XLR female balanced
  • L & R Input impedance: 600 Ω Or 10KΩ internal sel.
  • L & R Input level: 0dBm ± 3dB
  • Audio filter response: ± 0.25dB 20Hz to 15KHz
  • Audio filter attenuation: >48dB @ 19KHz,>39dB to 60KHz
  • Pre-emphasis: Flat /50 uS/75uS internally selectable
  • Pre- emphasis deviation from ideal curves: ± 0.2
  • Harmonic distortion on encoded channels: < 0.1% (0.05% type)20Hz to 15KHz
  • S/N: > 85dB rms
  • Stereo separation: > 60 dB ( 65dB type)
  • Pilot frequency: 19KHz ±1Hz
  • Subcarrier frequency: 38KHz ±2Hz
  • Subcarrier generation: 4.864KHz Crystal oscillator
  • Pilot level: 8 to 12% internal adjustable
  • Phase difference 19/38KHz: 0° ± 2° internal adjustable
  • 38KHz suppression: > 60dB
  • CMRR: > 60dB
  • Powering: 115 – 230 VAC rear panel selectable
  • Power consumption: 30 VA
  • Rack dimension: 19” 1 standard unit
  • Weight: 7 Lbs (3.2 KG)

Subscribe!

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 19,166 other subscribers

Archives
Contact